KMACA series

• 200, 300, 400, 500 and 600 are available for the mount width
• automatic alignment mechanism of the V-shaped guide
• Cam slider is removed from the rear
• this facilitates adjustment
• available angle is 0° to 60°(0°- 20° of 5° increments

• it is easy to lock at bottom or adjust without removing cam slide

Slide Structure ans Positive Return Structure

• since the clearance between the cam holder (base plate) and the cam slider (spring guide) is within 0.1 at one side
• it is easy to assemble the unit and make adjustments
• the clearance between the cam slider (positive returnfollower) and the cam driver is 0.03 to 0.07
• adjust the cutter clearance with the driver and teh slider assembled

Disassembly method of KMACA

1) Loosen hexagon socket head bolt and remove safety plate

2) Lossen hexagon socket head bolt and remove stopper

3) Pull and remove cam slider from cam holder to the rear

Assembly method of KMACA

- Assemble components in the reverse order of disassembly

1) Make sure that there is no foreign matter on the sliding area and assemble components

2 )The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly

3) When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided.

Request a quotation