KSAC-Cam

• Compact design
• mounting width 52 mm and shut height 125 mm
• Standard working force (one million strokes): 14.7 KN
• allowable working force (300,000 strokes): 29.4 KN
• Available angle is 0° to 80° at increments of 5°
• Automatic alignment mechanism of the V-shaped guide

Slide Structure and Positive Return Structure

• since the clearance between the cam holder (slider keeper) and the cam slider is 0.06 to 0.14 at one side
• it is easy to assemble the unit and make adjustments
• the cam slider makes alignment with the V groove guide
• the clearance between the cam slider (positive return follower) and the cam driver is 0.01 to 0.03
• reduced number of components and simple structure achieved a compact and low cost product

Make sure the standard working force and allowable working force is suitable before using the cams.

Disassembly method of KSAC52

1) Loosen hexagon socket head bolt (6) and remove stopper plate (10)

2) Pull and remove cam slider (2) from cam holder (1) to the rear.

Assembly method of KSAC52

1) Make sure that there is no foreign matter on the sliding area and assemble components

2 )The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly

3) When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided.

Request a quotation