KSACA series

• it is effective for piercing a high tensile or a thick material
• standard working force (1Mio. strokes): 29.4 kN - 3.0 ton with the mount width of 52mm
• allowable working force (300,000 strokes) is 58.8 KN - 6.0 to
• spring force is 3110 N ‒ 317 kgf
• more than three times that of similar model KSAC
• available angle is 0° to 60° at increments of 5°
• automatic alignment mechanism of the V-shaped guide

Disassembly method of KSACA

1) Loosen hexagon socket head bolt (6) and remove stopper plate (10)

2) Pull and remove cam slider (2) from cam holder (1) to the rear.

Assembly method of KSACA

- Assemble components in the reverse order of disassembly

1) Make sure that there is no foreign matter on the sliding area and assemble components

2 )The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly

3) When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided.

Request a quotation