KSACF series

• Standard working force (1Mio. strokes): 68.7KN
• allowable working force (300,000 strokes): 137.3KN
• Strong type with the return force of 600 kgf or larger
• available angle is 0° to 75° at increments of 5°
• ISO spring is used
• automatic alignment mechanism of the V-shaped guide
• optimum for thick sheet or piercing of high strength steel

• Clearance between the Cam Holder and Cam Slider is within 0.03
• Clearance between Cam Slider and Cam Driver is between 0.01 and 0.03
• This makes smooth movement for slide and positive return.

※ If a bigger clearance for Cam Holder or Cam Slider is needed, please contact sales department.

Disassembly method of KSACF

1) Loosen hexagon socket head bolt and remove stopper plate (10)

2) Pull and remove cam slider (2) from cam holder (1) to the rear.

Assembly method of KSACF

- Assemble components in the reverse order of disassembly

1) Make sure that there is no foreign matter on the sliding area and assemble components

2 )The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly

3) When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided.

Request a quotation